Parking is as easy as ABC with this Guide System

The system provides you with the different alarm sound & left, right

LED in accordance with the position of the obstacle

The digital display unit shows the distance in number between the

sensor and the obstacles in the back of the vehicle.

The LED indicates the location of an obstacle(left, right)

No problem in the dark or fog!

Easy bumper to bumper Parking!

NOTE ;

①The speed of vehicle should be less than 5km/h.

②The distance is shown in meter of feet and display unit is .1m(0.1ft)

③Stop the vehicle as the alarm sound changes into continuous from     intermittent.

④When there are obstacles on both sides, the closer one gets detected.

Sedan
Sensor can be installed on trunk door or rear lamp using double-sided tape.

RV(Van, Jeep)
Sensor can be installed above or below the rear bumper.

Mini Bus
sensor can be mounted above or below the bumper.

Truck
Sensor can be mounted on the rear part, 60~70cm above from the ground

[ Download manual ]

Power Supply : 12V DC
Sensing Distance : 0.4m-1.5m(1.3~5.0ft)
Use : Sedan, Van, Jeep
Function : Distance indicating in number
                Right & Left LED
                Different alarm sound

Economic Model
[ Download manual ]

Power Supply : 12V DC
Sensing Distance : 0.4m-1.5m(1.3~5.0ft)
Use : Sedan
Function : LED/ Different alarm sound

Power Supply : 12V DC, 24V DC
Sensing Distance : 0.4m-2.0m(1.3~6.5ft)
Use : Truck, Mini Bus, Bus
Function : Distance indicating in number
                Right & Left LED
                Different alarm sound
Note : Waterproof controller